Home · Supported miners · Antminer S19

Monitor & control your Antminer S19 from anywhere

AntminerTools gives you live hashrate, per-chain chip & PCB temperatures, power draw and remote reboot for your Antminer S19 fleet — on your phone or desktop, with no port forwarding and no VPN. Setup takes 2 minutes.

Create free account →
Antminer S19
SHA-256 · Bitcoin (BTC)

Antminer S19 — models & specifications

Manufacturer-rated values; they vary by batch and work mode. AntminerTools reads live values directly from each unit.

ModelHashratePowerCooling
Antminer S19 XP / XP Hyd.141–257 TH/s3010–5345 WAir / Hydro
Antminer S19k Pro / S19j Pro+105–120 TH/s3355 WAir
Antminer S19 / S19j Pro / S19 Pro82–120 TH/s~3100 WAir
Antminer S19 Pro+ Hyd.170–198 TH/s5428 WHydro

How to monitor your Antminer S19

Run the lightweight connector agent on any PC or Raspberry Pi on your farm's network, click Scan, and every Antminer S19 on your subnet appears automatically — model, worker name, serial and MAC included. From then on it's live stats every 30 seconds.

Everything you get for your Antminer S19

Live & average hashrate, per-chain chip/PCB temperatures, fan speeds and efficiency in J/TH
Alerts on overheating, zero or low hashrate and offline — with automatic auto-sleep & auto-reboot
Remote reboot, work-mode switching (Normal / Sleep / Turbo / Eco), LED blink and pool changes
Live profitability from real BTC price, network difficulty and your electricity cost

Antminer S19 monitoring — frequently asked questions

How do I monitor my Antminer S19 remotely?

Create a free farm, run the connector agent on any PC or Raspberry Pi on the same network as your Antminer S19, then hit Scan. You'll see live hashrate and temperatures within a minute, from anywhere — no port forwarding, no VPN, no static IP.

Can I see Antminer S19 temperatures and get overheat alerts?

Yes. AntminerTools reads per-chain chip and PCB temperatures every 30 seconds and can automatically put a Antminer S19 to sleep if it overheats, plus email you on the Unlimited plan.

Does it work with every Antminer S19 variant?

Yes — every Antminer S19 running stock Bitmain firmware with the standard web interface is supported, including Hydro and immersion variants, with special handling for water-cooled temperature sensors.

How much does Antminer S19 monitoring cost?

Free for 1 farm and up to 4 miners with full monitoring and remote control. Paid plans add capacity from $3/mo, and email alerts + remote desktop on Unlimited.

Start monitoring your Antminer S19 — free

Create your account, run the agent, and see every Antminer S19 live — before your coffee gets cold.

Create free account →
← All supported miners